About this deal
The front and back of the cover are zippered, so you can observe the printing situation in real time if necessary. It is not possible for us to draw any conclusions about you, and any data collected as a result will never be passed on to third parties.
or 6mm acrylic front panel with frame, doors, injection-molded hinges, magnetic latch, custom-designed latch mount in ABS, steel strike plates, and matching screws.The protective cover can be installed directly on the printer and can be easily dismantled and removed. PrinterMods is a proud cog in that machine - supplying the maker community with what they need to grow and thrive. The printer can create prints with dimensions of 220 x 220 x 280 mm , and the dimensions of the entire device are 425 x 460 x 570 mm. I still wouldn't leave it fully unattended, since it does say "flame retardant" and not fireproof, but I thankfully haven't had to test that part yet.
The plug entrance is located to the left, which may be inconvenient for some people, but in my case I think it's a pretty good way to reach the plug quickly to disconnect it in case of emergency. Just keep in mind that PETG is more flexible and will make the entire enclosure less rigid than if you had used ABS.It not only will withstand the heat year after year, but it's also one of the most rigid plastics to add that will make the enclosure sturdier. The thicker front on the most popular configuration makes the door operation much smoother and gives the entire enclosure a more solid feel. The protective cover is made of acrylic material with extremely high transparency so that the printing process is clearly visible. There are now two separate lines of Ender 3D printers: the original model now on version 2, and the S1 line.