Osmo Decking Brush Set - Decking oil applicator,Green,L

Product Information

Ideally used in conjunction with Osmo Decking Cleaner for wooden decking, Osmo Polymer Composite Cleaner, for composite decking and Osmo Wood Reviver Gel.

In this article, we are going to look at the best way to oil your wooden chopping board and other cooking utensils using our Chopping Board Oil and Cutting Board Conditioner.If traces of any previous finishes, such as oil and stain, still show, consider using a decking stripper. However, if the decking looks like it needs another coat of oil, it can be re-applied at anytime and as frequently as you think necessary. inch Angled Radiator Brush with 16 inch Long Handle for Painting Behind Radiators and Difficult To Reach Areas, Suitable for Emulsion, Gloss, Satin, Undercoat Paints, 1. Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description.

Profile - Osmo Osmo 021 Bog Oak DARK Decking Oil ***Recommended for IPE Hardwood Decking where slightly darker appearance required.Periodic cleaning and reapplication of decking oil may be necessary, depending on the level of wear and exposure to the elements. Wait for a few clear days, with no rain, and temperatures of between 10°C and 25°C (the best conditions for stripping a deck). Decking oils penetrate the timber, waterproofing and replacing natural oils and resins that are lost over time.

Our aim is to provide you with the products to meet all your decorating needs, with the support and service you need to get the job done. UV inhibitors present in the oil help to shield the wood from the damaging effects of the sun's ultraviolet rays, reducing the risk of fading or greying over time. With your gloves on, shake the solution, pour it out into a suitable container, then stir it up using a paint brush. You should wait four to eight weeks after the installation of your new decking before oiling it, allowing time for it to dry out thoroughly.Check the surface of the deck for any loose boards or raised screws, use a screwdriver to secure them more tightly. It’s been battered by seasonal showers, coated in falling autumn leaves, frozen by the winter winds and scorched by the summer sun.

These allow for greater coverage in one application than a brush and can be fitted with extension poles for ease and comfort.

Fit's any of our extension poles shown on the right hand side of the page, or broom handle with a screw-fit adaptor, but not Purdy poles. This helps to make sure that any existing treatment has eroded, allowing the new paint or stain to properly sink in and stick to the deck.