0.6mm Y Shape Tri-Point Y000 Tri-Wing Screwdriver Tool Kit Compatible with Apple Watch Repair Opening Tool

Product Information

While a Phillips screwdriver has slightly tapered flanks, a pointed tip, and rounded corners, a Pozidriv screwdriver has parallel flanks, a blunt tip, and additional smaller ribs at 45° to the main slots. The manufacturing process for Pozidriv screwdriver bits requires a slightly more complex cutter than that for Phillips, however both can be manufactured in four cuts from a tapered blank. Wilder, George. "What are the differences between the two types of drive– Phillips and Posidriv?" (PDF). v8register. Archived (PDF) from the original on 2016-04-09 . Retrieved 2017-09-02.

Triple-square fasteners are referred to as "spline" in the UK. This is potentially confusing if looking for the more unusual 12-spline flange type. While they are distinguished under close inspection by the angle at the tip of each of the 12 points (with a 90° angle on the XZN, instead of 60°) the general similarity and ability to insert the wrong tool can cause damage to the head. On the upper part, either there is a hole through which a wire is passed, or this end is made flat so that when this part is fixed to handle, it does not allow the shank to move separately. These are generally made of carbon steel. #3 Blade The polydrive screw drive, also known as RIBE, [74] is spline-shaped with rounded ends in the fastener head. The tool has six flat teeth at equal spacing; the sizes are determined by the diameter of the star points. Its primary advantage over older screw drives is that it resists cam out. It is used primarily in the automotive industry in high-torque applications, such as brakes and driveshafts. ISO Fastener Standards Should Be Referenced for All Metric Fasteners" (PDF). Archived (PDF) from the original on 2021-06-26 . Retrieved 2021-10-16.The Phillips/square screw drive, also known as the Quadrex, Pozisquare screw drive, is a combination of the Phillips and Robertson screw drives. While a standard Phillips or Robertson tool can be used, there is also a dedicated tool for it that increases the surface area between the tool and the fastener so it can handle more torque. [62] Recex [ edit ]

ISO 8764-1:2004(E) Assembly tools for screws and nuts — Screwdrivers for cross-recessed head screws — Part 1: Driver tips" (PDF). Archived (PDF) from the original on 2023-04-30 . Retrieved 2023-05-01. Tork-Nuts". Loss Prevention Fasteners. Ultra Fasteners Inc. Archived from the original on 2015-09-26 . Retrieved 2015-09-25. Pavlis, Egon "arcticpenguin" [pseudonym]. "When a Phillips is not a Phillips Plus So Much More!". Instructables: share what you make. Instructables. Archived from the original on 2012-02-09 . Retrieved 2012-03-11.McMaster-Carr catalog (116thed.). p.3056. Archived from the original on 2019-12-14 . Retrieved 2010-05-06. Needs login Apple uses Y-type screws to secure the battery on the 2010 and 2011 MacBook Pro, as well as an extremely small type in the Apple Watch, iPhone 7 and iPhone X. [87] [88] This style of screw is often called a "tri-wing", although that name more properly belongs to a different design (see below). a b c "Unterschied zwischen Pozidrive und Superdrive"[Difference between Pozidriv and Supadriv] (in German). Goedkopeschroevenkopen.nl. Archived from the original on February 22, 2014 . Retrieved 2014-03-20.

The Phillips Screw Company". www.phillips-screw.com. Archived from the original on 2014-12-21 . Retrieved 2015-01-16. National Bureau of Standards. (1942) National Bureau of Standards Handbook H28, Screw Thread Standards for Federal Services. pp. 177, 179, 182, 184

Machinery's Handbook (PDF) (27thed.). Industrial Press, Inc. 2004. p.1596. Archived from the original (PDF) on 8 September 2017 . Retrieved 8 September 2017.