LOUQE Raw S1 Mk I (Rhodium Grey) Mini-ITX Computer Case

Product Information

The next significant drop in size that I'd recommend is the Ncase M1. It does cost a bit more, but it's an excellent performer that's proven over the test of time. Some of these small sandwich builds can really build the heat on either the GPU or CPU, and some you are forced to use liquid cool. But the Ncase M1 let's you decide how you want to cool it - air or liquid. Great flexiblity, and you even have a Type C port available on the front. Just try to buy a GPU < 300mm in length to install into it. I've even seen 3090 builds in it, so it can definitely be a ton of power in such a small case. This case needs custom length power/fan cables (without sleeves, since you can't really see them anyways) because space is so limited. I recommend using PET hookup wire, since it's easy to work with and very thin. As I'll get into later, maximum airflow is very important.

Is it perfect? From one point of view, no. It doesn’t have air filtration. There’s no real front IO, and no room for expansion. But none of that is what the Louqe Raw S1 is about. Extra fans, filtration, and expansion space would make the chassis bigger and more complex, entirely defeating the point. As for looks, the Ghost S1 is most similar. In fact, it looks quite a bit like the same case stood vertically if a few inches were added all around. This is not an issue; the design of the Ghost S1 is a major selling point for many buyers. However, people who were not fans of LOUQE’s last offering are unlikely to change their minds here.The CPU Cooler Test - I'll get to this in more detail, but it convinced me thermals are acceptable which is not really the case.

The disappointing part is that with ~5mm extra height on the shell and some clever rearranging of the internals, Louqe could have fit a 140x15mm fan on top. I suspect, though, that they wanted a solid top plate for aesthetic reasons. They're clearly good designers, though, so I'm sure they could come up with something.

Table of contents

At 50% with no gasket, the air speed was below the resolution of the anemometer (0.1 m/s), so I had to bound the calculation. We see a 2X improvement at max fan speed and a >4X improvement at silent fan speeds. GIGABYTE B550I AORUS PRO AX gave me a bit of headache. CPU cooler clearance is perfect, plenty of room at all sides, however I struggled with CPU-less bios flash. I had to flash the bios to get support for Ryzen 5000 and I couldn't make the flash work. Eventually I googled out that it only works with USB 2.0 thumb drives. Granted I was using USB 3 thumb drive. So I replaced it with older USB 2.0 thumb drive and then the flash went through properly. Another problem with the board is that PWM fan speed regulation sometimes does not work. I have created separate post about it here: https://www.reddit.com/r/gigabyte/comments/r79tra/pwm_sometimes_failing_on_b550i_aorus_pro_ax/ . Not sure if it's issue with my concrete piece or if it's general problem with all these boards. This was resolved by removing Gigabyte software (SIV and EasyTune Engine). The new RAW S1 promises full gaming PC power in one of the smallest chassis currently available. Its thin, minimum aesthetic is also unique; the popular Corsair One and Ghost S1 are two of the only other thin cases of this size. Outside of these options, it is rare to find other models that can also support powerful components. In an already limited category, LOUQE aims to situate itself as the best option. I'm fairly sure that the same issue affecting the CPU performance is affecting the GPU. It's just not able to pull in cool air from outside. People using triple slot GPUs seem to have fewer issues, presumably because the fans are closer to the shell. A duct would probably help this, but it would have to be custom-designed for every model. My guess is that the GPU cooler moves enough air that some of it happens to escape through the top. I don't have a great explanation for the CPU; I suspect the vent changes some internal turbulent flow pattern that keeps hot air closer to the CPU/mobo.

The PSU will be mounted with the input AC connector pointing up, as close to the front side of the shell as possible. This serves two purposes: it moves the cable routing out of the airflow path, and it points the PSU exhaust up instead of forward, which should help a tiny bit. Now is a good time to mention my goal: maximum performance with silent fans. That means running all fans at around 50%. Eventually I'll set up a proper fan curve, but for now, and most of the rest of the tests, the fans are all just pegged at 50%. There's only a slight performance reduction here, again indicating sufficient airflow, and this is our CPU thermal performance target.

The spine-and-shell design make the RAW S1 extremely easy to build in. With the shell off, you have plenty of room to install components, route cables, etc. I definitely recommend following the instructions since there are a few things to remove before the shell can be taken off. All of the included cables (PSU input, power switch, USB-C, PCI-E 4.0) were easy to install and route. There's some community unhappiness with the fact that the USB-C cable uses the mobo I/O instead of the internal connector. It's certainly easier, but there's no reason Louqe couldn't have added a hole in the case bottom with a proper USB-C internal cable. Despite the added pain, the extra fan definitely improves things. The CPU is nearing maximum performance. When I tested the extra fan in open air, though, the difference was minimal. This tells us that the real benefit to having the extra fan is not improving static pressure through the heatsink, but rather cool intake air! With such a tight fit, the extra fan basically acts as a gasket for the CPU cooler. Internally, the Revolt 3 can also house almost any Mini-ITX system you throw at it, with room for large GPUs, up to a 280mm AIO, two 2.5-inch SSDs and one 3.5-inch drive. Better yet, its layout meanst it doesn't need a PCI-e riser cable, so you won’t have to worry about reduced bandwidth on an RTX 3000 or RX 6000 series graphics card. Despite its unique design, the case’s thermals do not suffer. LOUQE has tested temperatures in the chassis with two different GPUs. Using the 3D-mark Firestrike extreme benchmark, the Nvidia RTX 3080 FE (2-slot) reached 70 °C with the case closed. In the same test, an EVGA RTX 2070 FTW3 Ultra (3-slot) reached just under 60 °C. The Raw S1’s ability to fit 3-slot graphics cards is a nice step-up from some competitors. It supports triple-slot GPUs up to 145 x 65 x 320 mm in size. For comparison, the Ghost S1 fits dual-slot GPUs up to 143a x 45 x 305 mm. That, plus the money you spend on the case is money you’ll save on cutting the RGB and not caring about what your motherboard or GPU look like – not only do you not see the internals – you simply can’t fit much in here.