Cryorig CR-H7A Tower Cooler For AMD/Intel CPU

Product Information

Looking at things from the back, we see that Cryorig opted out of a flat edge, and offers peaks and valleys to support a second fan, and still offer the fans a bit of room to build pressure. Registering your product with Cryorig allows you to extend the manufacturer's warranty from three to six years. It does, of course, ramp up once we overclock the CPU, but even then, the noise is not more than a quiet, steady hum. After all, no matter how many fans are added there are only 3 heatpipes, which in this case really matters.

Just below the compatibility, we find dimensional renderings of the H7, and the fan that is paired with it.Along with the cooler inside of the box, there are three bags of goodies to grab, and a syringe of Cryorig CP9 thermal paste. The fact you have to move the arms to match the holes, and then screw them in without the arms moving.

And last but not least, the guys from Cryorig added a 41st fin, which is much thicker, made of plastic and is entirely in black located on top of the fins stack, including the company logo in the middle. Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital (UK) PLC, authorised and regulated by the Financial Conduct Authority. A+ seller and I asked to have seller send me a feedback revision request since my initial feedback rating is no longer valid.If you are looking for a simple, compact and affordable air cooler, you won't find one better than this. To keep the tradition, let’s start with the contact plate, which is the component of the heat sink with the most important role for the actual cooling. Registered office: Klarna UK Limited, 7th Floor, 33 Cavendish Square, London, W1G 0PW, United Kingdom. Cryorig H7 delivers a very stylish and good looking appearance made of a shiny heatsink with a black fin on top of the cooler, combined with black/white fan which will definitely stay neutral to and fit in every modern entirely painted in black case or modding project. Now for the H7 Quad Lumi CRYORIG took a different path compared to other CPU Air Cooler models so instead of using one or two RGB fans they married a QF120 white LED PWM fan (1600RPM/59CFM/25dBA/1.

Based on the original QF120 series the QF120 LED features white LED lighting as well as all of the existing features from the QF series including: Quad Air Inlet for added air intake, ultra wide PWM RPM range, integrated Acoustic Absorbers and HPLN bearing. Cryorig H7 was officially announced back in January 2015 and was actually the smallest single tower cooler in the company portfolio at that time. And of course, the last step was to add thermal compound and secure the heat sink to the processor by placing the X-Bar system and fasten the four bolts from the back of the motherboard.In addition to the usual effects such as breathing, it is also possible to set reactive effects that react, for example, to changes in temperature. however the comment you mentioned above about having to do that everytime you shutdown seems a little half arsed. Not only does it orient the flow through the fins correctly, but they definitely help take advantage of every drop of that 49 CFM the fan offers, allowing this smaller tower cooler to fit in places others won't. The QF120 fan also has a small splash of colour around the middle which adds some interest to an otherwise monochrome cooler.

Apart from that, the heat pipes are bent from the center to the back side of the cooler which will move the aluminum fin stack further away from the DRAM slots and will overall improve the compatibility with the various motherboards on the market. Enough about the additional accessories, so let’s put them aside until they are required for the actual heat sink installation and the following testing. Features which, when combined together, will definitely deliver a pretty serious cooling performance for a cooler with overall dimensions of 123(W) x 145(H) x 98(D) mm and overall weight of 711 g including the fan. H7 plus also includes the X-Bar quick mount system, delivered to guarantee a quick and secure solution for both Intel and AMD platforms. I already have the cooler ready to be tested and reviewed and I am really curious about the performance of this product while cooling my AMD A8-5600K processor at default, a bit overclocked, a bit more overclocked and even more overclocked frequencies.Inside, all the installation hardware is supplied in labelled bags, and this is something I love to see – it just makes installation so much easier if you know exactly which screw or which washer is required. The H7 Quad Lumi is CRYORIG's RGB illuminated CPU Air Cooler and after quite a bit of wait it finally found its way on our test bench.