276°
Posted 20 hours ago

Monoprice Select Mini V2 3D Printer - Heated Construction Board - Ready-Mounted - Free Pattern PLA Filament - Pre-Installed MicroSD card - Black

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

This unit itself is fairly large, with a footprint of 645 x 406mm, but built-in Wi-Fi allows you to locate it wherever’s convenient, without having to worry about trailing cables from your computer. It even has a built-in camera, so you can keep an eye on your printing progress while it’s whirring away in another room. The print base is only 120mm square, and the maximum print height is 12cm, so it won’t do for big, ambitious projects, but on the plus side, the printer itself only has a footprint of 287 x 190mm, so it’ll won’t dominate your desk. You don’t necessarily even need to connect it to a computer, as the Select Mini V2 can print directly from an SD card – or you can use its built-in 2.4GHz Wi-Fi receiver to operate it remotely. This mid-price personal 3D printer comes ready to work out of the box, and has a super-fine lateral print resolution of 0.047mm and just 0.01mm in the vertical plane – so you can produce prints with astonishing levels of detail. Key specs – Printing type: Single-extruder FDM; Print materials: 1.75mm PLA, MakerBot Tough PLA, bronze fill, copper fill, wood fill; Nozzle diameter: 0.4mm; Print resolution: 0.1mm; Quoted printing speed: Not stated; Print volume (WDH): 295 x 195 x 165mm; Printer dimensions (WDH): 528 x 441 x 410mm; Interface: 3in colour LCD with control dial; Connectivity: USB, Ethernet, Wi-Fi

Select Mini Malyan M200 3D Printer [Malyan M200 3D Printer] - MP Select Mini

The main alternative to the FDM process is stereolithography (SLA): instead of plastic, this uses liquid resin which is hardened by exposure to a laser. SLA isn’t ideal for domestic use, as it produces unpleasant odours and the models need to be bathed in alcohol once the print process is complete – but the end results can look cleaner, with more fine detail than you’d get from a comparably priced FDM machine. Where can I get 3D models to print? There are two main plastics used for this, namely polylactide (PLA) and acrylonitrile butadiene styrene (ABS). PLA tends to produce cleaner results, while ABS models are physically stronger; the difference isn’t huge, though, and most printers can use both. Many can also use filaments that are mixed with other materials, such as wood or copper. This lets you produce items with more aesthetically pleasing textures, and which may even be electrically conductive, if that’s useful to you.Designed for workshops and schools, the Replicator+ is one of the fastest 3D printers around. It offers great accuracy and quality, and it can produce large objects with footprints of up to 295 x 195mm.

Downloads - Firmware, Software, Drivers, Profiles, etc

Still, while the Replicator+ isn’t a budget choice, its speed and versatility are impressive: if you’re looking for a 3D printing workhorse, it’s well worth considering. Another question is whether you want a neatly self-contained printer or one where the workings are exposed for all to see. The latter style is easier to maintain, and if you’re into engineering and gadgetry you may prefer the look. However, 3D printing involves moving mechanical parts, and the extrusion unit can heat up to above 250°C – so an enclosed model is more appropriate for a domestic setting. An enclosed design will also minimise the noise from whirring motors and cooling fans. How does a 3D printer work? If you want to make a model out of more than one material (or in more than one colour) you can often pause the printer part-way through a print job, switch filaments, then resume printing. In this way you could, for example, print an object with a red bottom and a blue top. If you want to combine colours more intricately than this, you’ll need a printer with a dual extruder head, which can switch between two different filament feeds as it prints each layer. The Digilab 3D45 isn’t cheap, but it comes from a respected brand and has numerous features to satisfy 3D printing devotees. For one, it can print models of up to 254 x 152 x 170mm in size, and its fully enclosed design emphasises safety and keeps the noise to a minimum.printing isn’t quite as straightforward as regular paper printing. It’s a slow process – expect to wait an hour for even fairly small objects to emerge – and you may need to trim off excess plastic and generally finish up your model by hand once the printing process is complete. Key specs – Printing type: Dual-extruder FDM; Print materials: 1.75mm ABS, PLA, PETG; Nozzle diameter: 0.4mm; Print resolution: 0.1mm; Quoted printing speed: Not stated; Print volume (WDH): 230 x 150 x 150mm; Printer dimensions (WDH): 550 x 360 x 550mm; Interface: 4.3in colour touchscreen; Connectivity: Micro USB, Ethernet, Wi-Fi printing attracts creative, technical types – so there’s a definite draw to the idea of assembling your own 3D printer. Despite the branding, the i3 MK3S wasn’t the original DIY 3D printer kit, but that’s no bad thing as it benefits from the latest extruder design and all sorts of modern features such as an anti-rust coating, layer-shift detection, robustness against power interruptions and near-silent printing. For the price you might be expecting an assemble-it-yourself-kit, but this 3D printer comes ready to roll right out of the box, so you can start turning out models in minutes. Though it only has a single extruder head, it’ll work with regular ABS and PLA, plus wood, copper, steel and bronze-filled filaments, so you can create items with a good range of different appearances and physical characteristics. It’s easy to use too, thanks to a large 3.7in colour LCD screen and intuitive control wheel. With its 4.5in colour touchscreen the 3D45 is a breeze to use, and you can share it across multiple computers too – the supplied software supports both Windows and macOS – making it ideal for workshops and educational settings.

Best possible settings for V2 : r/MPSelectMiniOwners - Reddit Best possible settings for V2 : r/MPSelectMiniOwners - Reddit

Another thing to note is that the Photon doesn’t connect directly to a computer: rather, you have to save your models to a USB flash drive (one’s included in the box), then plug that into the Photon and select the file you want to print. Still, this is easy to do, thanks to a 2.8in colour touchscreen – and the end results are stunning, especially for the price. You don’t need to be an expert engineer to put it together, either: no soldering is required, all cables come pre-cut to length, and there’s an active online forum where you can ask questions and draw on other users’ experiences. And whenever the MK3S’ next-generation successor is released, Prusa will even help you buy and fit the necessary parts to upgrade your existing unit. Like the Dremel Digilab, the Replicator+ includes a built-in camera so you can monitor your print progress from afar. Support for 20 different file formats means you can work with pre-designed models from any number of sources, and in addition to built-in Ethernet and Wi-Fi connections there’s also cloud support, so you can manage print jobs over the internet – perhaps using the MakerBot Mobile app for Android and iOS.The Qidi Tech X-Pro looks almost like a regular printer, save for its futuristic colour scheme. It’s neatly self-contained, compact enough to sit on your desk at home and easy to operate thanks to its 4.3in touchscreen.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment