FLOPLAST 50mm x 32mm Grey Pushfit Waste Pipe Reducer

Product Information

Solvent weld reducer designed to fit into a larger solvent weld fitting (they cannot be inserted directly into a pipe) and then accept a smaller solvent weld pipe. Connections: Push-Fit Spigot (fits into another push-fit socketed pipe, fitting or connector) x Push-Fit Socket; NOT suitable for solvent welding. solvent weld waste fittings are to be used with solvent weld waste pipe with an actual external diameter of 36mm. The system can accommodate pitches from 5 degrees to 15 degrees, on standard modular kits the maximum projection is achieved at a pitch of 5 degrees.

The eaves beam cleverly double’s as an integral box gutter utilising the support posts as down pipes with the rain water exiting through the variable height post feet. The 50mm x 32mm FloPlast ABS Solvent Waste Reducer connects two pipes of different diameters (50mm and 32mm), ensuring cohesion across your drainage system. The reducer is ideal for connecting a larger 50mm waste pipe system to 32mm waste pipes where the system branches into smaller courses.IMPORTANT NOTE: Solvent Weld Waste Pipe fitting sizes are often stated in metric standard measurements, however the actual pipe size is measured in imperial. Years Guaranteed 10 Type Reducer Thread Size 1 1/4 inch Suitable for Plastic waste pipes, copper pipe and lead pipe Material Polypropylene Diameter 50. inch) x 32mm (1-1/4 inch) push fit fitting reducer, pushes into a 2 inch fitting to let it accept 1-1/4 inch pipe. The Polypipe solvent weld waste ABS 32mm and 50mm systems perform at higher operating temperatures than many other waste systems and are strong enough to withstand high impacts. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.

Please be aware that on occasion fittings may vary from the colour and design in the image above, regardless of this, they will be of the same size, and will be WRAS approved. The Evolution Canopy is an exciting new system, encompassing a modern design with clean sight lines providing ease of installation.Lead times are shown on the product and trolley pages and are always advertised in working days (Monday to Friday). The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. This product is made to be installed with 56mm (known as 2 inch solvent weld) and 36mm (known as 1 1/4 inch solvent weld) pipe or fittings.

The three options are as follows - 32mm Solvent Weld Pipe actually measure 1 1/4 inchs or 36mm, 40mm Solvent Weld Pipe actually measure 1 1/2 inchs or 43mm, 50mm Solvent Weld pipe actually measure 2 inchs or 56mm.They are used only by Mr Central Heating or the trusted partners we work with, where they are used for marketing, statistics and personalised ads.