Pro-fit Innovations Magic Gripper Adjustable Door Clamp 2 Pack

Product Information

You should place the Gripper Rods approximately 10mm away from the skirting boards with the pins pointing towards the skirting boards. If you’ve chosen to go down the DIY route, make sure you read this article in full. It will help ensure your project is a success. It will also help you minimise mistakes and keep frustrations to a minimum.

Getting the right size is also essential for aesthetics, so carefully measure the width of the doorway. Put your door bar against the frame of the door on the floor and make a mark for the end of your doorway onto the bar. You need a double-edged door bar with grips on both sides to connect carpets in two different rooms in the doorway. Whether you decide to use our fitting arrangement service or get right to it and do it yourself, you will find everything you need to know in this fitting guide. Attach the tape to the underside of your vinyl flooring – but make sure it is fixed on two different corners. Make sure you use 19mm nails to lessen the risk of piercing through the floorboard into pipes or cables.

Simple Solutions

Carpet grippers are long pieces of plywood, usually 1.5m long x 2cm wide. They have sharp angled nails in them that are designed to hold the carpet in place. They are fixed around the perimeter of the room and are used to help tension the carpet and hold it in place – this stops the carpet and underlay from moving and rippling. You can find them at most hardware stores. However, it’s often suggested that buying them online can lead to much bigger savings. You should always use new gripper rods when you install a new carpet. Old gripper rods can become weak, water damaged and hammered out of shape when you install and remove them. Meaning they won’t hold your carpet in place effectively. Get in touch Once you’ve chosen the flooring that’ll transform your home, it’s time to get it fitted! We’d always recommend using a professional flooring fitter for the best possible finish.

Here’s how you do it… place your gripper rod on the floor and make a mark with a pencil underneath where the nails are lined up with the floor. After you’ve marked up the space for your carpet gripper, you’ll need to drill a hole and insert a dowel rod. You can then use the dowel rod as a rawl plug for the carpet gripper’s nails. Once you’ve neatly inserted the dowel rod, you just have to hammer the nails in, and you’re done. A perfect installation that will hold your new carpet nicely. How to remove carpet gripper? When you are ready, place the door bar where it needs to be. The ideal position is central over the threshold with the join of the two carpets in the middle of the bar. Using your pencil, mark the screw holes, then put the bar to one side and drill each of the holes. Step Four – Firmly screw the door bar into place Once the carpet is fitted, there may be a slight odour which may be caused by the carpet or the underlay. This is called "off-gassing" and is due to chemicals called volatile organic compounds (VOCs) used in household items such as carpet adhesive, paint, and pressed-wood furniture. They evaporate at room temperature, which is why your carpet begins to smell once it is laid in your house. As well as arranging the standard fitting service, we can also arrange for the fitter to uplift and dispose of your existing floor covering. For a small fee, the fitter will take up and dispose of your old flooring before they fit your new one. That’s one less thing to worry about! The benefits of installing them are to ensure that where the flooring in both rooms meets (the doorway) is held securely. They are essential for safety. Without the bars, the rough edges of the two carpets would be seen and would pose a huge risk of tripping. In time, when continuously walking through the doorway, the carpet will fray and wear down. Not to mention where the carpets meet in the doorway would look unsightly.With the holes correctly drilled, you can put the door threshold strip, i.e. the door bar, onto the floor with the holes in line with those you drilled. First, ensure both rooms’ carpet edges are correctly aligned in the gripper. Butt the edges together and join them with tape, ensuring that the edges do not overlap and that the underlay is flat and level. Before you start it is important to locate any hidden wires or pipes using a pipe and wire detector.

All-in-All Flooring Accessories provides all the flooring accessories you will need to complete any flooring project. We have more than 30 years of experience, having been established by experts within the industry. Using your pencil, draw marks on the floor where the nails are positioned – in other words, exactly where you want your gripper rod installed. So, there you have it; you now know how to fit door bars for carpets the professional way. Once you have installed the first, the task of doing the rest of the doorways in the property will be easier. Of course, bear in mind that you will need different carpet door grippers based on the scenario, carpet to carpet, carpet to vinyl etc. Are you ready to fit your door bar over the carpet? You should now have holes filled with dowel rod, ready to accept the fixing nails of your gripper bar. Get your hammer, and hammer those fixing nails into the dowel rods. If you find a pipe or wire, mark the spot in these areas and use gripper adhesive instead of nails.

How to fix gripper rods to Concrete Floors

Parents don't always want to screw catches or other fixtures directly into the door or skirting board so the Door Gripper presents the perfect alternative.

Just as important as measuring the width of the carpet gripper for your doorway is measuring the gap between the floor and the bottom of your door. This is to ensure that you can close your door with the door bar in place. It goes without saying that if the door bar is taller than the gap, you will not be able to close your door. When you’re happy with the position of your marks, use your drill and drill bit to drill into the concrete floor. Use a vacuum cleaner to get rid of any concrete dust. Not only is it unpleasant to breathe in, you’ll want the area clear of debris to ensure a secure installation. Before fitting your new carpet you probably have some old flooring to remove, as well as preparing the sub-floor underneath. At Carpetright we make fitting a new floor easy at every step. In addition to our approved fitting arrangement service, we can also arrange to uplift your old flooring and dispose of it for you to ensure that you experience a hassle-free fit.If a lot of your floorboards are damaged, it’s cheaper and easier to pull them all up and start again. Use fit tongue-and-groove chipboard flooring panels which will give you a great base for your final flooring. The first step to fitting your new carpet is removing your old carpet and preparing your sub-floor. The sub-floor is just the foundation underneath the floor, usually, this is concrete or wood. If the sub-floor isn’t prepared properly, it will affect the way that your carpet lies and potentially ruin the overall finish. Measure the height and depth of each stair to give you the length before multiplying by the width. This will give you the area of each step.