Stormsure Flexible Repair Adhesive 15g Clear

Product Information

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

This adhesive is a single component moisture curing product. It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes. What is it used for? Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours. Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. Glue and self adhesive waterproof tape for repairing all types of outdoor clothing and footwear.Test compatibility on a small inconspicuous area before making a major repair. Stormsure Flexible Repair Adhesive can repair everything from worn material to a large hole. Repairs are waterproof, flexible and resistant to abrasion (weather and water abrasion). Allow 24 hours for the adhesive to cure.

Articles Associés

The kit contains a 5g tube of Stormsure Flexible Repair Adhesive ( Allow 24 hours for the adhesive to cure), a 15cm TUFF Tape strip, two 75mm (diameter) TUFF Tape patches, along with protective gloves. DIRECTIONS: Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours. Stormsure's Inflatables Repair Kit is perfect to make an easy, durable and effective repair on damaged or burst inflatables. Inflatables can burst easily but don’t need to go in the bin. The Inflatables Repair Kit makes it simple and easy to complete a durable, effective and long-lasting repair on all inflatable items using either Stormsure Flexible Repair Adhesive, TUFF Tape patches or both.

Stormsure Flexible Repair Adhesive is one of the few products that can repair rips, holes, and worn areas on all types of cabriolet/soft top roof. Repairs are waterproof, flexible and resistant to abrasion (movement and weather abrasion). Allow 24 hours for the adhesive to cure. Q. I have a RUBBER WELLINGTON BOOT which has split on the upper where the boot flexes and creases when I walk. Will any of your products repair this bearing in mind every step taken creases the boot across the repair? Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface. The kit contains a 5g tube of Stormsure Flexible Repair Adhesive, a TUFF Tape strip, two 75mm (diameter) TUFF Tape patches, along with protective gloves. Stormsure is the main brand from Stormsure Ltd. Stormsure Flexible Repair Adhesive is the Flagship product and where Stormsure begin it's journey 20 years ago. Stormsure Flexible repair Adhesive is our very own formula which works differently to almost all other adhesives on the market today. It's polyurethane composition and moisture curing properties make it completely waterproof, extremely durable and very very strong making it the perfect solution for almost any repair!Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap. Un tube d'adhésif de réparation flexible Stormsure est une partie essentielle d'un kit de réparation pour les randonneurs, bricoleurs, pêcheurs, cavaliers, chasseurs, plongeurs, campeurs, surfeurs, marins, ingénieurs etc ! Stormsure Flexible Repair Adhesive can repair everything from worn material to a large hole. Repairs are waterproof, flexible and resistant to abrasion (weather and water abrasion). You don't need to buy new, repair your favourite items with Stormsure glue. You can plug the hole or patch the tear with this excellent product. A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15 °C- 25 °C for best results). Do not use below 5 °C.If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a transparent liquid again and it will work fine. Test for compatibility on a small inconspicuous area before making a major repair. Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours. Stormsure Flexible Repair Adhesive is a polyurethane-based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

Returning your item

The kit contains a 5g tube of Stormsure Flexible Repair Adhesive, two 75mm (diameter) TUFF Tape patches, along with protective gloves. Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills. Other Characteristics TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light. The Stormsure Car Soft Top Roof & Convertible Repair Kit offers a convenient and affordable way to repair your soft top/convertible roof. Cabriolet/convertible roofs can get worn down with time, by poor weather, or by being damaged by vandals. How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.