BOSS Fs-7 Dual Foot Switch

Product Information

It's the little things that make the big difference for the gigging musician and this little pedal is one of those big differences. BOSS has primed the Katana-110 Bass combo amp for live performance by allowing you to store six Tone Setting memories. Once you’ve set up your preamp type, EQ settings, Blend level and effects, you can save it as a Tone Setting for instant recall. Memories can be selected via the panel or with an optional footswitch, expression pedal or controller such as the GA-FC. Hooking up a footswitch is highly recommended if you plan on gigging, as it lets you alternate between a pristine clean Modern voice to a gritty Vintage one in a flash. Handy utilities include a balanced XLR output for connecting to a house system and a switch that chooses whether a direct, pre or post signal is sent. Recording Companion a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc."). The FS-7 footswitch is built like a tank, just like those 30 year old vintage Boss pedals on your board that refuse to die.

Please note that this extended warranty is currently only available on products sold within the UK, EU or EEA, and is subject to the terms and conditions as detailed on the extended warranty certificate provided.

What Makes Our Sales Engineers Great?

Of course whether you buy a cheap Chinese two button footswitch or something a little more upmarket it's still going to effect the same outcome: RC-1, RC-3, RC-30, RC-202, RC-505, ACS-PRO/LIVE, VE-8, select BOSS Compacts, GT-1, GT-001, GT-100, GT-1000. a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof. As you’d expect from a Katana amp, the Katana-110 Bass is equipped with BOSS effects. BOSS is one of the most renowned names when it comes to effects so you can count on the onboard effect models to sound fantastic. Core processing is provided by the dedicated drive and compressor/limiter sections. FX1 and FX2 are armed with a plethora of effects from the BOSS bass effects library. There are classic modulation effects such as Chorus and Flanger as well as dramatic ones such as Octave and Bass Synth. FX2 also features delay and reverb for when you want to add space and depth to your bass tone. Connect your Katana-110 Bass to the BOSS Tone Studio editor to access over 60 effect types. Effortless Layout

b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License. b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions. Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.Yeah we've all been there and had to put our board somewhere nonsensical so that the wired-in footswitch cable would reach the amp! The FS-7 is about a third of the width of a traditional two button footswitch, which gives you space for at least one more pedal on your board! My only concern is that A channel’s button is the upper one, and as far as I can tell there’s no option to swap A for B if you’re using a single stereo cable for both switches (see the photo below). There is a little toggle on the side that I can’t read but it may be a polarity switch. But it’s not a problem that the separate A/B outputs and a crafty use of adapters wouldn’t solve. a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.

DUAL CUBE LX is a desktop powerhouse. Here are some must-have accessories to take it to the next level. Read more… Just remember if you want to use the LEDs you'll need to power the FS-7 with a suitable 9V DC Powersupply, but the good news is there's an included power splitter so that you get get power to the FS-7 using your currently pedal board power supply without having to sacrifice another pedal! You should get an instant answer on whether your application has been successful, though in some rare cases Klarna or V12 may need to look at the application in more detail.Collection and delivery costs are included for the first 2 years in the event of an item becoming faulty