Ubiquiti US-16-150W 150 W 16 Port UniFi PoE Switch

Product Information

To cache the firmware in your controller you open your controller and go to the settings (lower left gear icon). Search for Firmware and select Device Firmware Cache (or select Updates > Firmware in the settings menu) A factory reset is useful for a creating fresh setup of a UniFi Console, or device that was already configured in a managed state. Restoring with the Reset Button If you want 10 Gbps ports for clients, or need a distribution switch to aggregate other switches, the XG series has a few options. Some are in the 1st generation, some are in the 2nd: Wait for the device to fully boot, the led will turn dark blue (or stay white if it wasn’t adopted before, approximately 5 minutes max)

EdgeSwitches are more flexible and capable, and are a better fit for network operators, WISPs, managed service providers, and other more advanced networks. If you need features like link aggregation, TACACS+, RADIUS, 802.1X, MAC filtering, ACLs, or static routing, you’re better off with an EdgeSwitch than a UniFi switch. UniFi switches support many of these features, but are often less configurable, poorly documented, and less reliable.

I mounted it, plugged it in to power and the other switch I had. By the time I got upstairs, the controller already found the new switch. There’s a lot to cover when it comes to PoE, so I’ll try to keep it as simple as possible. There are 4 main types of PoE to know about:

USW-Flex — When using PoE passthrough ( Note: this was upgraded to 802.3at PoE+ in a firmware update) If you keep having problems with the installation of the firmware you can also try to install it your self directly on the device. To do this we are going to access the device using SSH. We use the Ubiquiti equipment at work (mainly the access points) and have been very impressed with how they are built and their reliability. We have a couple hundred access points in service now for three years, only one died and was replaced under warranty. Basic layer 3 features like static routing (supported as of firmware version 4.3.13.11253) and inter-VLAN routing.I have both connected to the could so now I can configure/adjust my network from anywhere and view live video as well.