Reloop RP-7000 MK2 Professional Upper Torque Turntable System, Black

Product Information

In operation the turntable spins up to speed almost instantaneously and runs with no audible motor noise, and only a slight noise emitted as the starting torque is applied. Speed change is handled at the press of a button and braking is electronic, with the platter coming to an abrupt yet controlled standstill with no overshoot. Stall torque emulates the performance of a Technics 1200 MKII requiring slightly greater pressure on the platter of the Turn 5 to bring it to a stop. It’s a little more ‘torquey’ than the classic 1200 and less ‘torquey’ than the newer generation, but it is ‘torquey’ enough to account for stylus drag and to impart the energy and enthusiasm for which direct drive turntables are renowned. Measurements and Specs Limited to 15oo units (i.e. 750 pairs), it’s the same as the regular unpainted model, yet Reloop has still delivered a significant lump of PR to my inbox: The Reloop 7000 is a *significant* step up in quality from the LP120. Much better motor, better tonearm, damped platter, etc. To equate it to the LP120 is patently ridiculous. Apparently however it is not OK to simply go out and buy a pair of gold turntables. They must be earned through the art of scratch war, for fear of being called a fake DJ by keyboard warriors, some of which probably don’t even scratch let alone even enter battles.

mode buttons, three layers with 12 performance modes (Hot Cue, Loop Roll, Slicer, Sampler, Pitch Play, Saved Loop, Slicer Loop, Saved Flips, Platter Play, Transport, 2 User Modes) and dual layer parameter buttons per side Der eingebaute zuschaltbare Vorverstärker macht den Spieler flexibler, falls man mal auf eine Anlage umsteigt, die keinen separaten Phono-Eingang hat. Revenues are 40% from member-listeners, 40% business underwriters, and 20% CPB. And they have a nice cash cushion in the bank. :)Part of the problem is that different users have different expectations. This isn't to say that some products aren't more reliable than others, but those who know how to interpret an unweighted rumble spectrum graph are looking at things differently than someone who simply wants to reliably beatmatch records with reasonable sound quality in their bedroom. For the latter group—namely, most of us—you just want things to work.

I've been in the broadcast industry for over 45 of my 55 years (commercial and non commercial, as on air and as engineer). How about you striving to do better, and go from hobbyist sounding, to the best signal on the dial you can provide. I can also tell you that in these United States, IHeart Radio, Cumulus, Midwest, and other larger stations, and the mom and pops I engineer for don't use MP3 or any compressed files of dodgy provenance. Their standards and practices don't allow this as a general policy. They don't want to risk costly legal action either. As well as the above technical innovations, the RP-7000 MK2 GLD is equipped with a few functions that will make any DJ’s life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. One of our favourite DJ turntables, courtesy of German DJ brand Reloop. Classic Technics-inspired design updated with nice features like reverse mode, 78rpm setting and second start / stop button. Hi, Ashley. I still enjoy your writings and the reviewed gear is often tempting. But… I’m an old guy, pretty conservative and somewhat old-fashioned, so, as long as my equipment is fully functional and gives pleasant results to my ears, I resist pulling the trigger… Built for the club: rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and moulding compound for high vibration damping and isolation

You can use the large multicolored LED pads for performing digital wizardry with hot cues, loops, and sampling. Controlling the pitch of the platter using the performance pads for all kinds of melodic pleasures is another delight, but it takes some practice. However, the joy, in the end, is absolute.

It seems that I have an over-average sensitivity to wow&flutter, Anything over 0.10 – I can hear it and it bothers me. Thanks to the recessed rear connection panel, the RP-7000 MK2 GLD can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage. Here I agree with KentT. Better idea to once pay a serious money for a unit and then you don`t have any problems anymore. And also landfills would be smaller if the industry and consumer society decided to go this route. And today when you can find a lot of vintage turntables which were seriously designed and are service friendly it is not hard to decide. Even if you pay too much for a unit it is better to take this route, you will have less problems like with new stuff. Unlike buying more than 1000 eur equipment. high-contrast OLED displays showing real-time information of effects, BPM, beat divisions and setup menu What the Turn 5 had was a superior sense of that bass. The lower frequencies were firmer, massy and with a greater degree of substance. I point that finger directly at the plinth. The Lenco’s being plastic and lightweight and the Turn 5’s metal-based plinth being heavy and sturdy. The Turn 5 provided a greater degree of balance in the mix, therefore, because the lower frequencies were more prevalent, retaining a significant part of the overall soundstage.

Pioneer DJ PLX-1000

I began with vinyl and the country ballad, You’re Free to Go via Emmylou Harris from the album, Thirteen. This version is limited to 1500 pieces worldwide and has been enhanced with golden elements. An engraved plate with a unique device code makes every RP-7000 MK2 GLD an exclusive collector's item. In addition, this special edition is supplied with a golden headshell and an exclusively designed slipmat with Reloop signet. The subtle golden elements on the turntable make it a minimal, yet elegant and timeless design. Toggle between Filter, Crush, Flanger, White Noise and customisable user FX via the mode button with RGB indication

Low-quality MP3 files have a distinctive sound, and I've heard it many times over the air when I'm out driving around and listening to the FM stations. Built for the club: Housing design in an even heavier version with additional stiffening through the use of metal, rubber and plastic elements An extra start/stop button at the top-left of the turntable, to make a start/stop button more accessible for scratch DJs with the turntable turned 90 degrees to normal Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage. POWERFUL MOTOR WITH EXTENSIVE ADJUSTMENT POSSIBILITIES An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2’s top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.turntable, golden headshell, slipat with Reloop signet, LED needle light, counterweight, Phono RCA cable with earth, power cord, operating instructions