FireAngel Optical Smoke Alarm with Escape Light & 3 Year Replaceable Batteries, FA6611-R (ST-623E replacement, new gen) , White

Product Information

This indicator is typically programmed to activate after a certain number of years or as recommended by the manufacturer. It serves as a reminder to replace the smoke detector with a new one to maintain reliable fire detection capabilities. How Do I Look After My Smoke Alarm?

You may be able to install this alarm onto your existing FireAngel baseplate (ST-622, ST-620, ST-750 models) but if not, or if replacing a ST-623E model, it only takes 2 screws to update If RadioLINK+ is used, ensure the alarms have been House Coded together correctly. They may have been connected to a nearby system. Reset and House Code again.

Get a free quote today.

Heat Alarms: They detect the increase in temperature from a fire and are insensitive to smoke. They can therefore be installed in kitchens. They only cover a relatively small area of a room, so potentially several heat alarms need to be installed in a large kitchen. As a rule of thumb, it’s best to use optical alarms in living rooms, bedrooms or downstairs hallways where you either have a lot of upholstered furniture and soft furnishings or the alarm is likely to be set off by cooking fumes. Keep ionisation alarms for upstairs hallways or areas where dust or exposure to the elements (say, through an open door) might potentially set off an optical sensor. If in doubt, go optical or use a multi-sensor alarm. Use of ionisation alarms is generally being discouraged by many fire services, and some manufacturers have now discontinued their ionisation products. Follow your family’s fire safety plan to get out of the home immediately. The smoke detector is old and needs replacement Smoke alarms chirp intermittently to signal low battery power. The chirping sound serves as a warning to prompt battery replacement and ensure the continued functionality of the smoke alarm in detecting potential fires. 3. Smoke Detector Red Light Not Blinking? This one’s pretty easy to decipher. Fire alarms are designed to get your attention by any means necessary.

Combined Optical Smoke and Heat Alarms: Combinations of optical and heat alarms in one unit to reduce false alarms while increasing the speed of detection. Nest Protect (2nd Generation): The Nest Protect features a ring of LED lights that can change color and provide various indications. When the ring turns red and the device speaks out “Emergency, there is smoke,” it means smoke has been detected. The red light in this case signifies an immediate danger. As of February 2022, the Nest protect smoke and CO alarm no longer meet the requirements of the new Scottish alarm laws. This is because, while it can be linked to other Nest alarms, it has no way of detecting heat rises or of being linked to another heat alarm. You need to know what to do when you see your smoke detector flashing red. In this guide, we explain what the red LED light on your smoke detector could mean and go over some other signals your detector could be sending you. How smoke detectors work If it does go off inadvertently, the large, central test/mute button makes it easy to silence, saving your ears from a thrashing. As with the Pro Connected, it buys you ten minutes to clear the air, while a “sleep easy” function gets you eight hours of quiet if you press the button once the low battery warning starts. Little touches such as this elevate the ST-622Q above your run-of-the-mill smoke alarms, making it one of the best options for most households.Make sure you, and everyone in your home, know the fire plan for your building and where fire alarms and fire exits are. As with all buildings, you should plan and practise an escape route. Stay Alert for Red Light Signals: Pay attention to any red light signals on your smoke alarm. Red lights may indicate low battery, malfunctions, end-of-life, or other issues. Take appropriate action as per the manufacturer’s instructions or seek professional assistance if needed.

If your home is on one floor, one smoke alarm, preferably of the optical type, may be enough to provide you with early warning of a fire. By following these simple steps, you can effectively look after your smoke alarm, enhance its reliability, and ensure the safety of your home and loved ones. Frequently Asked Questions 1. What Do The X-Sense Light Colours Mean? If you live in Scotland find out more about the law in your area on our blog post here. (link to homeowner Scottish regulations blog) Sometimes a red light will flash when debris in the system affects its ability to function. Your smoke detector might give off false alarms or blink red constantly if it is dirty or clogged. These alarms are more sensitive to smaller particles of smoke produced by the flaming stage of fires than optical alarms, and more easily triggered by cooking – causing false alarms.Ionisation alarms ionise the air between two electrodes. These are positively and negatively charged, creating a small current inside the chamber. Plan an escape from your home in advance and talk about it with your family. If a fire occurs you may have to get out in the dark and difficult conditions. Escaping will be a lot easier it everyone knows where to go. Make sure your routes remain free of any obstructions and that there are no loose floor coverings that could trip you. Test the Sensors: Some smoke alarms come with additional sensors, such as carbon monoxide detectors. Test these sensors according to the manufacturer’s instructions to ensure their proper operation. An extension lead or adaptor will have a limit to how many amps it can take, so be careful not to overload them to reduce the risk of a fire. There are a variety of different models to choose from. Your local fire and rescue service will be happy to give you advice on which one is best suited for you.

So if you’re out of your home and not near your phone when the messages come through, you’ll have no way of knowing the alarm was sounding. You can put them in kitchens and garages because they’re not prone to false alarms from cooking or exhaust fumes. But they are slower to respond than smoke alarms. Find the alarm with the red light rapidly flashing. Press its ‘Hush’ button to silence. If that does not silence it, clean the alarm using a vacuum. Wait for 10 minutes and the issue should be resolved. Avoid Painting or Covering: Never paint or cover your smoke alarm, as this can hinder its functionality. Keep the smoke alarm free from any obstructions, including decorations or other objects.

Test Button

Test your smoke detectors at least once a month to ensure they work properly. To do this, press and hold the test button on your detector. You should hear a loud, high-pitched beeping sound. Start troubleshooting your device if the sound is quiet or there’s no sound at all. Pros: Good for bedrooms, landings and hallways, and near to kitchens as they aren’t as prone to false alarms from cooking.