MICROJIG Matchfit DVC-1177K2 Dovetail Clamp Pro, Green/Yellow/Silver

Product Information

Our dovetail clamp, therefore suitable to medium loads, it's made from a full aluminum block T6061 and red anodized to resist weathering. Because the clamp pressure is normally directly over the clamp head in the groove, the groove is supported and the board does not tear out. These are values which ideally would be at 0 but as our test optics are all curved lenses, there will always be astigmatism and coma present. By using the MATCHFIT Dovetail Clamp Pro you will easily be able to quickly execute projects around your home.

e versátil kit para fixação de peças para trabalhar com as mesmas em serras e tupias, permite uma infinidade de configurações e projetos criados pelo próprio usuário.You can set stops and clamp material anywhere on the bench surface, without being confined to the edge. The PV rating (Peak To Valley) is a measurement from the highest point (Peak) to the lowest point (Valley). The operation is very simple, just remove the original flange, acting on three small threaded dowels and entering our flange.

It’s recommended to put the bolt towards the box side as shown in the pictures above and not to block the USB ports and status indicators. Now you can build fences of any height, mount workbench extensions easily, affix jigs to reference surfaces or even create your own track saw system, thanks to the dovetail slot convenience offered by these new clamps. It’s the perfect union of strength and sensitivity, a testament to Microjig’s dedication to enhancing your woodworking experience. Micro Jig's MATCHFIT 1" Dovetail Track Hardware allows you to create a variety of sleds, jigs and fixtures with hold-downs and stops that can move freely and lock down where needed, anywhere you can.The big dovetail clamp Vixen+Losmandy PLUS for EQ6 allow to install on the Skywatcher EQ6 or N-EQ6 mount telescopes with Vixen and Losmandy type dovetail bars. Although the clamp is designed to be used with the GM4000 Mount, it’s also suitable for the GM3000 too.

Also a screw kit is included for mounting the dovetail clamp direct on the top of the handle of all BRESSER Messier und EXPLORE-SCIENTIFIC telescopes. Does exactly what I needed - sticking a small dob onto a camera tripod for a youngster who's showing real interest in the stars. This amount includes seller specified domestic postage charges as well as applicable international postage, dispatch, and other fees. From this, we can adjust the position of the test optic and the reference sphere to obtain a perfectly calibrated system.I have been after a clamp to fit to my guide scope to make it easier to move to other scopes without having to use spanners. Make sure you understand how your router works and have a sturdy guide or you may end up with tracks that you cannot use.

Easily build additional jigs, sleds, fences, workbenches, drill press tables by routing tracks with the MatchFit dovetail profile. Once the Zygo test report has been completed, the optical alignment is thoroughly tested and tuned to ensure they are spot on before they leave us. It’s an entire system designed to give you all the functionality of T-track and T-track accessories, at a fraction of the cost.Whether sanding, routing, or grinding, trust in the reliable hold that keeps your workpiece securely in place, eliminating unexpected movement and boosting your confidence in the process. DIY Dovetail Tracks: With the MatchFit system, you can route your dovetail clamp tracks using a dovetail bit.