Owatrol 1 Litre Net-Trol Wood Cleaner by OWatrol

Product Information

Net-Trol can be used neat or diluted up to a maximum of 1:4 with clean water depending on surface condition. Leave to stand for approx 10-20 minutes. If surface starts to dry dampen with a mist application of water Next, scrub the surface with a stiff nylon scrubbing brush again and rinse with large amounts of fresh clean water (you could use a pressure washer here to make your job easier if you have one). For particularly stubborn rust stains you may need to repeat this process again. Immediately after rinsing and whilst the wood is still wet, you now need to apply Net-Trol to clean and neturalise the wood. Applying Net-Trol It will save both time and effort when cleaning and restoring colour to wood by effortlessly removing both the surface and ground in dirt in as little as 15 minutes without the need for sanding. Net-trol is also biodegradable and does not contain solvents or bleach meaning it’s not harmful to plants and shrubs so it’s safe to use in the garden.

Dilunett is our amazing solvent free paint and coatings remover. It is powerful enough to remove up to 8 previous coatings in just 1 application! It’s ideal for stripping large areas as Dilunett is non-flammable, does not dry out and remains active a long time. Brush off any physical surface contamination i.e. moss, general dirt etc Application Removal of oils and millglaze Remove Dilunett and dissolved paint with a stiff nylon scrubbing brush or paint scraper while flushing with water. The use of hot water makes this part of the job easier. Alternatively, you can use a pressure washer (max 60bars / 870psi). Ideal for surfaces difficult to strip due to size or intricate design and horizontal and vertical surfaces.Don’t panic though, it is quite simple to remove rust stains with Owatrol’s Net-Trol by following our how-to guide. Rust damaged patio Step 1: Wet the surface Interior – Sand wood with 100 grit paper to open the pores, dust off and degrease the surface with methylated spirits.

Hardwoods including exotic hardwoods and woods rich in tannins i.e. Cedar, Oak, Teak, Ipe etc may darken with Aquanett. Unfortunately, rust stains are an all too common problem on patios and other stone or concrete areas. Recommended application: for best results surfaces must be clean, dry and free of loose dirt. Approximate Coverage

Clean up

With a fast working solution, Owatrol Net-trol Wood Cleaner & Brightener can restore weathered wood to its original colour within 15 minutes. Net-trol is also effective in clean and neutralising tannin staining and removing rust stains. Note: Any rags, steel wool etc. soaked in D1 may spontaneously catch fire if improperly discarded. Rags, steel wool etc. must be saturated with water after use or placed in a sealed, water filled metal container, before disposing of it with household waste. Maintenance Leave to stand for approx 10-20 minutes. If the surface starts to dry, dampen with a mist application of water

As Dilunett is biodegradable and non flammable, it is even safe to use in poorly ventilated or confined areas. Wet surface with fresh, clean water. Apply Owatrol Net-Trol. Scrub surface to agitate the Owatrol Net-Trol. Leave to stand for approx. 10-20 minutes. If surface starts to dry, dampen with a mist application of water. Scrub surface while flushing with water or use a pressure washer (max. 60 bar/870 psi). Rinse thoroughly with fresh clean water. If required repeat procedure. Net-Trol is fast-acting and easy to apply. It can work in just 15 minutes and can be applied with a brush or roller. Unlike bleach or chlorine-based cleaners, it is not harmful to the fibers of the wood. It is also harmless to plants and shrubs so it can be safely used in your yard. Net-Trol is water-based and so can simply be rinsed with water and a brush or a pressure washer. Exterior wood – weathered grey or dirty: Cedar, Larch, Pine (pressure treated or not), Teak, Iroko, Ipe, ...It is safe to use on all exterior wood types and is also an excellent degreaser for use on tropical hardwoods to allow finishes like Deks Olje D1 to penetrate. Net-Trol can remove stains caused by tannin bleed and will remove all traces of weathering caused by mildew, pollution and UV rays. Why should I use Net-Trol? All previous coatings must be completely and thoroughly removed with Dilunett and stripped surfaces neutralised with Net-Trol before applying Deks Olje D1.