M.2 SATA SSD to USB 3.0 External SSD Reader Converter Adapter Enclosure with UASP, Support NGFF M.2 2280 2260 2242 2230 SSD with Key B/Key B+M(Can't Fit for PCIe NVMe/PCIe AHCI with Key M)

Product Information

The SHE-C325 isn’t the most attractive enclosure on the market, but it does use mostly aluminum casing (the left part near the USB port is plastic) and at 4.5 x 1.5 x 0.4 inches, it’s pretty portable. SSK’s enclosure also comes with a thermal pad to help send heat to the aluminum casing, but you’ll only want to use it if your SSD doesn’t have a built-in heat spreader. On a few M.2 enclosures, including the SSK SHE-C325, we found that our test Kingston Rage Fury SSD’s built-in graphene heat spreader, which adds 3.5mm of z height to the drive, didn’t leave much vertical clearance. However, the SHE-C325 could close anyway, without scraping the drive’s surface. Considering that many M.2 SSDs have built-in, non-removable heat spreaders, every enclosure should accommodate them. If you want an SSD enclosure with some RGB bling and a swanky sci-fi design, Asus’s ROG Strix Arion is for you. The M.2 NVMe enclosure has two RGB lights, an illuminated ROG logo on the top and a small plastic fin on the side. These show a pleasing pink and purplish light show which Asus markets as being part of its “Aura Sync” RGB ecosystem. However, there doesn’t seem to be any way to actually control the lights as the Asus Armoury Crate software we tested with did not recognize the drive. The all-aluminum chassis has ridges to help with heat dissipation and it comes with both a thermal pad you can put on top of your SSD to keep it cool under prolonged loads. It’s a rather attractive silver enclosure that has a small cutout / handle area you can use for threading through a carabiner. I also have a couple Orico drives with fans, but those are just overkill and mostly for show. They do work, just big and require tools to swap drives.

The Sabrent EC-USASP has an on / off switch, something you won’t find on most SSD enclosures but a nice convenience if you want to leave it plugged in but only power it on when you need it. Most 2.5-inch SATA enclosures have USB 3.0 micro B as their output port and come with USB Type-A to micro B cables. However, the EC-USASP has a USB 3 Type-A port (5 Gbps) and comes with a Type-A to Type-A cable. So, if you are planning to connect the enclosure to a laptop that has only Type-C ports, you can use a USB Type-A to Type-C cable (something many people have lying around the house) to do so. The outer shell is all aluminum that gives it stylish appearance and the durability you need. The power consumption is quite low and proper heat dissipation ensures longer life of the drive. The data transfer speeds are up to 10 Gbps for USB 3.1 and up to 6 Gbps for USB 3.0. It is compatible with the 22 x 30 / 42/ 60/ 80 mm size SSD. 6. StarTech.com M.2 SATA SSD to USB 3.0 Enclosure The Orico’s M2PV-C3’s design is less polarizing than that of the SSK SHE-C325, but it actually uses cheaper materials, as the top panel is ridged aluminum but the sides and bottom are ABS plastic. How fast? Enclosures can only handle as much speed as their USB ports and the USB ports on your computer allow. Most 2.5-inch and 3.5-inch hard drive / SSD enclosures operate under standard 5 Gbps USB (USB 3 / 3.1 or 3.2 Gen 1). Most M.2 SSD enclosures operate at 10 Gbps (aka USB 3.1 or USB 3.2 Gen 2).These adapters come very handily when you have to use an M.2 NGFF SSD drive using the USB port on your computer. The setup is straightforward. All you have to do is just put your SSD into the adapters enclosure. Now the cabinet looks like the pen drive with a relatively more significant in size. This can be your ultra-high-speed USB drive or whatever the name you give it. So let’s find out the best M.2 to USB adapters. 1. Tanbin M.2 NGFF Portable SSD Enclosure USB3.0 Case

This is one of the most performant 10 Gbps enclosures and one of the most convenient, thanks to a tool-free design that allows you to slip the cover off by pressing a spring-loaded switch. It's a few dollars more than the Sabrent EC-SNVE at present and we prefer that enclosure's flip-up lid to the Plugble's slide-out one. The fastest enclosure we've tested, the ZikeDrive uses an ASMedia ASM2464 controller to deliver USB 4 read speeds that are 20 percent faster than we've seen on the competition. Write speeds were less impressive, but still strong in most scenarios. However, the ZikeDrive doesn't make the best list yet, because it's part of an IndieGoGo campaign and not available for general sale. If quality, durability and compact form factor are what on your mind, then Kesell USB M,2 NGFF to USB 3.1 Type-C could be the excellent companion for you. It is compatible with Windows, Linux, and MAC. The built-in advanced chips ensure superior and stable performance with ultra-fast data transfer speeds. To install our drive in this enclosure, we first had to remove the aluminum panel, which is attached with a tiny, 5-point star screw rather than a normal Philips head type. The enclosure comes with a small star-shaped screwdriver, but we lost it and had to go digging through our iFixit kit to find an appropriate head.Quality comes at a price. Unitek M.2 SSD enclosure with USB 3.0 interface is a bit costlier than the former ones here. But the quality of the material inside out makes it worth the money. The adapter supports SATA B/B+M keyed M.2 NGFF SSDs. It is compatible with the 22 x 30 /42 /60 /80 mm size SSD. It has a USB C interface with USB 3.0 standard A host port cable. It delivers up to 6 Gbps data transfers speeds. The whole setup is again plugged and play, no need for drivers or software.

Qnine adapter works fine with Windows, Linux, and MAC. It supports SSD drive of the size 22mm x 30mm / 42mm/60mm/80mm NGFF (M.2) Interface. The SSD drive doesn’t need any additional power, it gets power from the USB port and supports boot function. 4. Unitek M.2 SSD Enclosure USB 3.0 How often will you open it? Most of the M.2 SSD enclosures we tested were made to be opened once, have a drive installed inside and then screwed closed for the long haul. While you can reopen all of them and change drives at any time, you should consider an enclosure with a tool-less design if you think you’ll be changing the drive frequently. There’s also a small, built-in battery that provides 5-10 seconds (depending on which model you get) of service time in the event of a power failure. That brief window of time might be enough to allow the drive to finish writing some data and avoid corrupting your drive in the event of an ill-timed unplugging.

To see how each SSD and hard drive enclosure performs, we installed an SSD, connected the enclosure to our testbed laptop (a ThinkPad X1 Carbon 10th Gen) and then ran a series of benchmark tests, using three different apps: PCMark 10’s Storage Benchmark, DiskBench and CrystalDiskMark 8. To maintain consistency, we used the same M.2 NVMe SSD, a Kingston Rage Fury PCIe 4.0 SSD (2TB), in all of our M.2 enclosures and the same 2.5-inch SATA SSD (a 1.9TB Toshiba model) in all of our 2.5-inch and 3.5-inch SATA enclosures. Which form factor? You have to get an SSD enclosure that matches the physical size of your drive. If you have a 2.5-inch hard drive or SSD, get a 2.5-inch SATA enclosure. For a 3.5-inch hard drive, you’ll need a 3.5-inch SATA enclosure. M.2 SSDs require M.2 enclosures, but be careful if your SSD is shorter than the standard 2280 (80mm size); most but not all enclosures have mounting screws for the shorter sizes. Also, if you plan to use an M.2 SATA SSD, as opposed to an NVMe one, make sure that the enclosure supports that standard instead (or in addition), because most M.2 enclosures are NVMe only. Installing an SSD is pretty easy as you just need to unscrew the cover, attach the M.2 drive along with the optional cooling pad, screw in the mounting screw and reattach the cover. Unfortunately, both the cover and the mounting screw are 5-point star shaped screws, which are not very common. However, there’s a screwdriver in the box.